129-GC2_usage
1. Fusion Plasma Step
Fusion plasma step to secure stratum corneum passage:
❷ With nothing applied wait until the water dries slightly.
❸ After turning on the power[ ], it begins from 1st intensity.
To select Fusion Plasma mode in other modes, press shortly to change to Fusion Plasma mode.
To select Fusion Plasma mode in other modes, press shortly to change to Fusion Plasma mode.
❹ As the probe hardly touches the surface of the skin, lightly massage the entire face as if brushing.
Please note: If there is water on your face, plasma does not form properly. Please dry thoroughly before proceeding with Fusion plasma step.
2. Smart Boosting Step
Promoting cosmetic application by skin boosting by Electroporation:
❶ Apply proper amount of cosmetics evenly over the face.
❷ Press smart boosting mode button. It begins from 1st intensity.
❸ Put the probe in close contact with the face and evenly boost whole face as if massaging for about 5 mins. The upper part of the head makes it easier to care for narrow areas.
❹ You can adjust the use time according to the degree of absorption of cosmetics.
❺ Depending on the amount of oil and moisture in your skin, it may stop working. Apply sufficient amount of cosmetics and make the optimal condition for absorbing cosmetics.
❻ When using on the neck, please be careful not to directly affect the uvula.
3. Micro-current lifting step
Lifting by micro-current:
❶ Facial wash with cleansing cream or foam.
❷ Apply proper amount of cosmetics for lifting and anti-aging evenly over the face.
❸ Press shortly the lifting mode button. It begins from 1st intensity.
❹ Apply the head of the device to the surface of the face for 5 minutes and slowly massage it while lifting it along the direction of the arrow as in the picture.
❺ You can adjust the use time according to the degree of absorption of cosmetics.
